Menu
Filaments
There are 119 products.
📌 Quick Comparison
| Filament | Easy to Print | Strength | Flexibility | Heat Resistance | Notes |
|---|---|---|---|---|---|
| PLA | ⭐⭐⭐⭐⭐ | ⭐⭐ | ⭐ | ⭐⭐ | Beginner-friendly |
| ABS | ⭐⭐ | ⭐⭐⭐⭐ | ⭐⭐ | ⭐⭐⭐★ | Durable but needs enclosure |
| PETG | ⭐⭐⭐⭐ | ⭐⭐⭐ | ⭐⭐ | ⭐⭐⭐ | Great all-rounder |
| TPU | ⭐⭐ | ⭐⭐ | ⭐⭐⭐⭐⭐ | ⭐⭐ | Flexible prints |
| Nylon | ⭐⭐ | ⭐⭐⭐⭐ | ⭐⭐⭐ | ⭐⭐⭐⭐ | Engineering parts |
| Composites | ⭐⭐–⭐⭐⭐ | ⭐⭐⭐–⭐⭐⭐ | variable | variable | Special effects |
| ASA | ⭐⭐ | ⭐⭐⭐⭐ | ⭐⭐ | ⭐⭐⭐⭐ | Outdoor use |
| PC | ⭐ | ⭐⭐⭐⭐ | ⭐⭐ | ⭐⭐⭐⭐⭐ | High performance |
🧠 Tips for Choosing
-
Beginners: Start with PLA; no heated bed needed.
-
Functional parts: Try PETG or ABS.
-
Flexible parts: TPU is your go-to.
-
Engineering prints: Nylon or Carbon-fiber blends.
--------------------------------------------------------------
1. Filament & Printing Process Parameters
| Filament | Nozzle Temp. | Bed Temp. | Printing Difficulty | Warping | Moisture Sensitivity | Layer Adhesion | Print Stability | Process Notes |
|---|---|---|---|---|---|---|---|---|
| PLA | ~190–220°C | 20–60°C | Very easy | Very low | Low | Good | Very high | Ideal for beginners |
| ABS | ~220–250°C | 90–110°C | Medium | High | Low | Medium | Medium | Requires enclosure |
| PETG | ~220–250°C | 70–90°C | Medium | Low | Low | Very good | High | Stringing possible |
| TPU | ~210–240°C | 20–60°C | Difficult | Very low | High | Good | Low | Needs slow print speed |
| Nylon (PA) | ~240–270°C | 70–100°C | Difficult | Medium | Very high | Very good | Low | Must be dried before use |
| PC (Polycarbonate) | ~260–300°C | 90–120°C | Very difficult | Very high | Medium | Good | Low | Enclosure strongly recommended |
| ASA | ~230–260°C | 90–110°C | Medium | Medium | Low | Medium–good | Medium | More stable alternative to ABS |
2. Final Part Performance Properties
| Filament | Mechanical Strength | Impact Resistance | Temp. Resistance | Flexibility | UV Resistance | Chemical Resistance | Wear Resistance | Surface Quality | Typical Applications |
|---|---|---|---|---|---|---|---|---|---|
| PLA | Low–medium | Low | Low (~60°C) | Rigid | Low | Low | Low | Very high | Visual models, prototypes |
| ABS | Medium | Medium | Medium (~100°C) | Slightly flexible | Low | Medium | Medium | Medium | Enclosures, functional parts |
| PETG | Medium–high | High | Medium (~80°C) | Slightly flexible | Medium | High | Medium | Good | Functional prototypes |
| TPU | Medium | Very high | Medium | Very flexible | Medium | Medium | High | Medium | Seals, damping parts |
| Nylon (PA) | High | Very high | High | Flexible | Low | Very high | Very high | Medium | Gears, mechanical parts |
| PC (Polycarbonate) | Very high | Very high | Very high (~110–130°C) | Rigid | Medium | High | High | Medium | Industrial components |
| ASA | Medium–high | High | High | Slightly flexible | Very high | High | Medium | Good | Outdoor applications |